The VCS-NVR1 Network Video Server Multi-Channel Viewer can centrally monitor and control
up to 64 camera channels with its high-quality, Internet Explorer interface & easy to use software.
IE Browser interface provides a variety of functions such as Live Video, Recording, snapshot, and
integrates with a motion detection Alarm System.
IE Browser PTZ control, up to 20 users with user/admin permission levels. IE browser view
and remote management through built-in HTTP server set to port 80 by default & port configurable.
Motion detection email trigger SMTP function & FTP video upload.
Auto emails capture still images to your e-mail address when the motion alarm is activated.
Industry standard RS-485 Interface with multi-protocol support.
Supports Pelco-D 2400, Pelco-P 4800, 9600.
- Built-in Mic + Audio-in Channel
- SMTP / FTP / Screen Capture / Live Record
- OSD - On Screen Display
- QCIF, HALF D1, CIF, FULL D1
- Small, Normal, Large x2 Picture + FULL SCREEN
- DDNS Support / DHCP / ADSL (PPPoE)
- IE Browser multi-user with PTZ controls
This fully functional software provides a virtual digital video recording system. You can now use this software to
connect one or up to 64 VCS-NVR1 video servers simultaneously. Best of all, you can now remotely record your video
to any PC or laptop. The quality is excellent, the video is fluid, and the software is easy to use.
Connect the VCS-NVR1 on your LAN, open/forward defined port 80 (or selectable http port) on your router,
and view from anywhere in the world you have an internet connection.
Multi-user simultaneous access with multi-level access permissions.
- DDNS support / DHCP / Upstream Bandwidth Selectable 3Kbps~3Mbps
For VCS-NVR1 connections accessing the Internet by ADSL cable modem, it is possible to configure the network
using DHCP. Access the Camera Server using a domain name from a DDNS Server. such as DNS2GO.com
( DNS2Go is a Dynamic DNS service that enables Internet users to host their own domain name,
even if they have a dynamic IP address or are behind a router. Excerpt: http://www.dns2go.com/ )
Check the safety and well-being of your family, pets and property remotely through the Internet!
Supports Pelco-D 2400, Pelco-P 9600 4800 , with pull-down menu for user-configurable protocols,
baud rates, and camera ID.
SMTP settings allow email trigger events to upload still images to your email account upon motion detection
and alarm events. Sends still images to the preset SMTP Server and e-mail Address
if any alarm occurs in the installed sensors. The alarm still images are transferred as motion is detected.
Configurable motion detection zones save HDD space by recording motion only where you need,
and ignoring privacy mask zones such as tree limbs and non-critical movement.
|
Network IP Video Server With RS485 PTZ Controls
Full Remote Access from the Internet With PAN/TILT/ZOOM Controls
Synchronized Sreaming Audio over Internet - D1 Resolution - 30FPS Real Time
Converts any NTSC CCTV camera into a network 'IP' camera!
Network Video Server with PTZ RS485 Controls + Built-in Mic w/ Audio in
Remote View IE PTZ Browser Control + Remote Software
Works as stand-alone Network Server for single camera, PTZ or Any NTSC Video Signal.
IE PTZ controls & RS485 interface
Operates Pan/Tilt/Zoom cameras
With Pelco protocols (examples):
   
IE Browser remote view PTZ controls through internet / Remote software
Speed Dome Camera Interface and Controls
- RS-485 Interface
- PAN/TILT/Zoom Remote Camera Control
- MPEG-4 Compression
- QCIF, HALF D1, CIF, FULL D1
- Upstream Bandwidth Selectable 3Kbps~3Mbps
- Synchronized Streaming Audio over internet
- Video & Audio Recording from IE Browser
- Preset, Pattern and Auto Scanning
- Viewer Auto Reconnect Signal Search
- Multi-user / multi permission level
- Advanced Motion detection
- Email JPG IMAGE alarm trigger
- FTP Video Upload alarm trigger
- Multi connection Central Monitoring Software
- OSD - on screen display configuration
- DDNS support
|
Network IP Video Server With RS485 PTZ Controls
Full Remote Access from the Internet With PAN/TILT/ZOOM Controls
Synchronized Sreaming Audio over Internet - D1 Resolution - 30FPS Real Time
Converts any NTSC CCTV camera into a network 'IP' camera!
*Intended for Legal Use. By use of this product, the user agrees to local, state and federal laws regarding legal use.
Intended for Legal Use. *Design and specifications subject to change without prior notice.
|
Network Video Server with PTZ RS485 Controls + Built-in Mic w/ Audio in
Remote View IE PTZ Browser Control + Remote Software
Works as stand-alone Network Server for single camera, PTZ or Any NTSC Video Signal.
  
Cat5 Network Cable, CD, power supply & BNC/RCA adapter included
PC software requirements:
Pentium IV 2.0GHz or more
RAM Memory 512MB or more
Video Memory 64MB or more
Resolution 1024 x 768 or over
OS Windows 2000/XP/Vista
Service Pack Installation recommended
Web Browser Direct-X 8.0 or above
VCS-NVR1 video server is IN STOCK and ready to ship TODAY!
Normal List Price $299 - ON SALE NOW! Limited Quantity!
|
